Nurse Call System
- This interactive emergency call system for hospitals consists of the composite medical communication devices to offer safety
and convenience in large hospitals and senior homes.
This system was designed to exchange the communication between Nurse and patient with Master station and sub station by
data communication system. This system was composed with master station which can control and display in the system and
Power controller, and the sub station was composed with 4 wire type and lt can be covered maximum 32 ea sub station from
1 mater station, and lt can be installed the presence switch, emergency switch and corridor lignt.
- Master Receiver
-
It is master receiver and it can receive from everywhere like wards,toilet, shower room etc.
Model No : JNS-4CM
* Call and talk to wards
* Sending event from wards
* Speed dial input function for 60 wards
* "16 rooms of public toilets
(emergency function)"
* Call and talk to other recevier
* 1000 series nurse waiting room receiver.
Central Controller
-
It is applied new type of Stored Program Control by micro processor.
Controlling Main reciever, all nurse call system function can control.
All the functions, operating modes are localized by the card is easy to
install and maintain
Model No : JNS-PSM
* 1000series main controller
* "16 rooms of public toilets
(emergency function)"
* Max 29 units of JNS-1050M(Master station)
communication
* 5 units of JNS-1050S(Sub station) are
connectable
to 1 unit of Master station
* Compatible JNS-1060 (Master consol)
and TP-90AN
* Compatible guiding light .
Nurse Call Sub Station
-
It is Nurse call devic have standard featuurse, easy installation and easy
operation that can be used as substation.
Model No : JNS-4CS
* Call and talk to JNS-4CM(Master consol)
* Extension JNS-4CS
* 1 unit of each toilet emergency S/W, Presence S/W,
Showeroom emergency S/W and Corridor light
installation available
Call Cord
-
It is connected substation attached in the ward and it helps to call the nurse in lying state.
Model No : CC-200
* Call cord
* It is for serious patient
* Special cable is applied to prevent sagging
* Easy attach and speration using connector
* Clip helps to fix at seat
* Paging cord
* Compatible with Sub station like JNS-4CS
and call emergency
Corridor Light
It is installed near entrance of ward and when patients call the nurse or doctor it is used to check the ward.
Model No : CL-302C
* Color adjustable
* Good appearance
* Easy installation
* Each different lamp display is available for call,
presence, emergency call, medical call etc
Presence Switch
-
This unit display using corridor light that doctors or nurses on their rounds were detected paging signal and in the patient care.
Model No : PB-500
* Install inside of wards wall
* Front pannel is specially surface treated
and it make good appearance
* Presence switch
* Compatible with JNS-4 wired/ 1000 series
* 2 wired non polarity dry contact type
Emergency Paging Switch(Bath Room)
-
Patients in the event of emergency in toilet send signal to nurse waiting room and coridor light pressing emergency swich wich is attached to the wall.
Model No : ES-400
* Toilet emergency switch
* Anti-corrosion by waterproof
* Both pull and push type
* Compatible with JNS-4 wired/ 1000 series
* 2 wired non polarity dry contact type
* Compatible with CL-302
Emergency Paging Switch(Shower Room)
-
Patients in the event of emergency in shower room send signal to nurse
waiting room and coridor light pressing emergency swich wich is attached
to the wall.
Model No : ES-410
* Anti-corrosion by waterproof
* Shower room emergency switch
* Compatible with JNS-4 wired/ 1000 series
* 2 wired non polarity dry contact type
Ceiling Speaker
-
The speaker can be used inside and outside together and matching transformer built-in type
Model No : SP-63O
Nominal Power : 3W
Impedance : Com / 3.3��/5��/10��
Frequency Response : 180Hz~13KHz
Sensitivity (1m/1w) : 98dB
Weight : 650g
Outer Dimension (mm) : ��230��150(D)
Wired Intercom
-
Wired Intercom High power wired intercom with function of lamp off
upon receving call/hands-free type (Non-polarity)
Model No : PI-10LN
Master Unit : PI-10LN/ 20LN/ 30LN
Power Consumption: 180mA
Communication Distance: 2000m/50mm
Power Supply: AC 100~240V / 50 , DC 24V
Wiring: Individual 2 wires (Non-polarity)
OR Interphone - Master Receiver
-
Surgery room Interphone system is designed to call and receive the
necessary support from anesthetic room or waiting room not using
doctor and nurse hands during operation
Model No : JNS-12
* Sergery room master consol
* Call and talk to JNS-101
OR Inter Phone - Sub Station
-
This device is designed for doctor or nurse under opeation to call and receive
the necessary support from anesthetic room or waiting room using their elbow
Model No : DR-6KO
* Talk to 6 units of JNS-360
* compatitble with FS-600 (CALL)
* Substation for surgery room
OR Inter Phone - Foot Switch
Surgery room Interphone system is designed to call and receive the necessary
support from anesthetic room or waiting room not using doctor and nurse hands
during operation.
Model No : FS-600
* It is installed bottom of the wall (above the ground 30cm) and doctor and
nurse call and talk to nurse waiting room using
kicking(Foot) during operation
* Operating Room Inter Phone(Foot)
* Compatible with DR-6KO and call receiver
* Call and talk using kicking(Foot) during operation
OR Inter Phone - Arm Switch
-
This device is designed for doctor or nurse under opeation to call and receive
the necessary support from anesthetic room or waiting room using their elbow.
Model No : AS-100
* Installation on the surgery room wall It is installed
surgery room wall above the floor (150cm or less)
and call surgery waiting room using elbow or hand
by doctor or nurse under opeartion
* Call and talk using elbow in surgery room
* Substation for surgery room